SAE AMS4128 Aluminum Alloy Bars, Rolled or Cold Finished, 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451), Solution Heat Tr
时间:2024-05-29 01:31:32 来源: 标准资料网 作者：标准资料网 阅读：9477
Product Code:SAE AMS4128
Title:Aluminum Alloy Bars, Rolled or Cold Finished, 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451), Solution Heat Treated and Stress Relieved by Stretching
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope:This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.50 mm) and over in nominal diameter or least difference between parallel sides.
Product Code:SAE J968/1
Title:Diesel Injection Pump Testing-Part 1: Calibrating Nozzle and Holder Assemblies
Issuing Committee:Diesel Fuel Injection Equipment Standards Committee
Scope:This part of SAE J968 specifies two types of calibrating nozzle and holder assemblies intended for the testing and setting of diesel injection pumps on test benches. It applies to: a. A calibrating nozzle and holder assembly with a single hole orifice plate; b. A calibrating nozzle and holder assembly with a delay pintle type nozzle.The approximate range of the calibrating nozzle and holder assembly is up to: a. 300 mm{sup}3/stroke with the single hole orifice plate; b. 150 mm{sup}3/stroke with the delay pintle type nozzle. Setting and maintenance requirements are specified in ISO 4008/3.
基本信息
| 标准名称： | 消防桶架 |
| 中标分类： |
船舶 >>
舾装设备 >>
舱面属具 |
| 替代情况： | 被CB/T 3676-95代替 |
| 发布日期： | |
| 实施日期： | 1968-10-01 |
| 首发日期： | |
| 作废日期： | 1996-04-01 |
| 出版日期： | |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 船舶 舾装设备 舱面属具